Full Product Catalogue

A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.

A water-based rust remover which is 100% biological degradable and free from toxins.

Intumescent coating for 60 minutes fire resistance to structural steelwork.

A single pack solvent-based thin film intumescent coating for up to 60 minutes on structural steel.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A two component, high solids low VOC epoxy micaceous iron oxide.

Suitable for use as a finishing coat for protection of structural steel.

Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.

A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

A high gloss coach enamel available in historic colours.

Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.

Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.