£9.95 delivery on orders excluding certain products & postcodes *
A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.
A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.
A 2 pack, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.
A high solids, 2 pack epoxy brushing and spraying mastic, with micronised glass flake, aluminium and anti corrosives.
2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
For use on a wide variety of substrates including hand prepared rusty steel.
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
A high performance epoxy system for application at temperatures down to 0°C.
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A tough, hard wearing finish coat for application over properly primed surfaces.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.
A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.
Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
A two component, metallic zinc primer for steel in aggressive environments.
A versatile primer for long-term protection of steel in severely corrosive environments.
Advanced coating offers quicker drying and reduced risk when curing at sub-zero temperatures.