£7.75 delivery on orders excluding certain products & postcodes *
Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.
A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.
A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.
A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.
A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.
A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.
A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.
A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.
Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.
A 2-part, low odour, low viscosity, multi-purpose epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed.
A Pliolite Exterior Masonry Paint. Use at low temperatures, -5°C. Showerproof in as little as 20 minutes
Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.
A high opacity flat black acrylic coating for metal, wood, cement and masonry.
A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.
Propane gas torches for use with thermoplastic line marking and thermoplastic signs.
An oil / water resistant, flexible and UV resistant finish to concrete floors and block paving driveways.
Formulated for rapid and permanent repairs to concrete and masonry surfaces.
A two pack, fast curing flexible coating for line marking paint for concrete surfaces.
A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.
A two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance.
A durable, low odour, low emission line marking paint with a rapid through cure and return to service.
A single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.
A epoxy adhesive ideal for bonding a wide range of building materials to one another e.g. concrete, brick, metal, stone and wood.
A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.
A 2 pack water based epoxy floor paint for concrete and polymer modified cementitious screeds. Category FeRFA Type 1 & 2.
A 2 part epoxy primer for use on flooring prior to application of Centrecoat Armourcoat 3-350.