Full Product Catalogue

Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.

A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.

A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.

A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.

A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.

A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.

A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.

A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.

Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.

A 2-part, low odour, low viscosity, multi-purpose epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed.

A Pliolite Exterior Masonry Paint. Use at low temperatures, -5°C. Showerproof in as little as 20 minutes

Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.

A high opacity flat black acrylic coating for metal, wood, cement and masonry.

A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.

An emission free cleaning solution for mineral substrates such as limestone.

Propane gas torches for use with thermoplastic line marking and thermoplastic signs.

An oil / water resistant, flexible and UV resistant finish to concrete floors and block paving driveways.

Formulated for rapid and permanent repairs to concrete and masonry surfaces.

A two pack, fast curing flexible coating for line marking paint for concrete surfaces.

A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

A two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance.

A durable, low odour, low emission line marking paint with a rapid through cure and return to service.

A two pack, water dispersible epoxy based primer / sealer / clear coating.

A single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.

A epoxy adhesive ideal for bonding a wide range of building materials to one another e.g. concrete, brick, metal, stone and wood.

A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.

A 2 pack water based epoxy floor paint for concrete and polymer modified cementitious screeds. Category FeRFA Type 1 & 2.

A 2 part epoxy primer for use on flooring prior to application of Centrecoat Armourcoat 3-350.