Full Product Catalogue

A 2 pack, high-gloss acrylic polyurethane enamel with good gloss and colour retention.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A 2 pack semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

A finishing coat based on acrylic resin and non chlorinated plasticizer for optimum gloss and colour retention.

A water-borne, acrylic dispersion paint with good anti-corrosive properties.

A water-borne, acrylic dispersion based paint for interior and exterior moderate to sever corrosive environments.

The suitable thinner for various products within the Hempel Hempalin range.

A water based quick drying and protective clear coating for wooden and concrete floors.

A high quality primer used prior to painting walls and plaster. Resistant to solvents and salts.

Formulated to decorate and protect the façade of a brick property.

A high quality enamel for use at temperatures up to 600°C indirect heat.

A classical low sheen finish on gates, railings, lamps, ornamental ironwork, Tudor style woodwork, barns and scoreboards etc.

A water based primer for MDF surfaces. Available in White.

A binding and sealing solution for degraded and porous masonry.

A one component waterborne acrylic thin film 90 minute intumescent coating.

An anti fouling release finish coat based on 100% pure silicone binder technology.

An easy-to-use, low viscosity primer suitable for all polyurethane topcoats.

A two part, solvent free, very low VOC emission, tough-elastic, coloured, self-smoothing PUR resin.

A thixotropic, 2-component repair mortar, based on a combination of epoxy resins with refined quartz fillers.

A cementitious epoxy resin compensated 3-component coating used as bonding primer and reinforcement corrosion protection.

A three part epoxy mortar, consisting of an epoxy binder and quartz sand with a maximum grain size of 1.2 mm.

A one component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3.

Epoxy modified mortar for leveling and finishing concrete, mortar, or stone.

A 2 part, elastic, 100% solid, fast curing coloured pure polyurea liquid applied membrane with good chemical resistance.

Fouling coating that ensures an active surface continuously renewed providing a clean hull for the whole season.

A two component, high build polyamide cured epoxy primer coating for application down to -5°C.

A 2 pack, solvent free amine cured epoxy. A tank coating for crude oil and aliphatic petroleum products.