Full Product Catalogue

Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.

A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.

A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.

A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.

A three pack methacrylate resin coating suitable for use in freezer grade environments down to -40°C.

A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.

A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.

A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.

A two pack, fast curing flexible coating for tarmac or asphalt surfaces such as balconies.

A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.

Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.

A very fast curing fire resistant and slip resistant coating offering a full return to service after just 2 hours.

A 2-part, low odour, low viscosity, multi-purpose epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed.

Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.

A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.

Propane gas torches for use with thermoplastic line marking and thermoplastic signs.

A two pack primer formulated to prepare oil contaminated floors prior to application of subsequent Centrecoat floor coatings.

An economical dust proofer for non-trafficked cementitious surfaces. Formulated for use as a primer under Fosroc Renderoc repair systems.

An oil / water resistant, flexible and UV resistant finish to concrete floors and block paving driveways.

A fast drying, non-toxic, low odour, single pack water based acrylic paint designed to seal, colour and protect concrete floors.

Formulated for rapid and permanent repairs to concrete and masonry surfaces.

A two pack, fast curing flexible coating for line marking paint for concrete surfaces.

A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

A 2 part, low viscosity, multi-purpose epoxy resin primer for Sika flooring systems.

A two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance.

A durable, low odour, low emission line marking paint with a rapid through cure and return to service.

A two pack, water dispersible epoxy based primer / sealer / clear coating.

A single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.