Full Product Catalogue

A high opacity flat black acrylic coating for metal, wood, cement and masonry.

A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.

An emission free cleaning solution for mineral substrates such as limestone.

An oil / water resistant, flexible and UV resistant finish to concrete floors and block paving driveways.

Formulated for rapid and permanent repairs to concrete and masonry surfaces.

A two pack, fast curing flexible coating for line marking paint for concrete surfaces.

A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

A two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance.

A durable, low odour, low emission line marking paint with a rapid through cure and return to service.

A two pack, water dispersible epoxy based primer / sealer / clear coating.

A single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.

A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.

A 2 pack water based epoxy floor paint for concrete and polymer modified cementitious screeds. Category FeRFA Type 1 & 2.

A 2 part epoxy primer for use on flooring prior to application of Centrecoat Armourcoat 3-350.

Provides a tough, hard wearing coating for medium duty traffic giving high film build and wear resistance.

Provides a tough, hard wearing coating for light & medium duty traffic giving high performance at an economical cost.

Cost effective, bitumen based protection for boat hulls.

A water based system for the removal of anti foul coatings.

A highly elastic primer with good filling properties. Part of the Remmers Colorflex Render System for Park Homes.

A 2 part epoxy, high build, slightly textured, fast curing floor coating and seal coat. Ideal for workshops and garages.

A single pack clear polyurethane multi-purpose sealer for treating concrete floors, finishing wooden floors and finishing porous tiles.

A thixotropic, two part, polyurethane modified epoxy joint filling compound for vertical and horizontal joints.

A two part, epoxy wall coating suitable for use alongside resin flooring to provide a continuous seamless finish.

A weather resistant, clear, water based impregnation and glaze for concrete.

A two pack, solvent free, epoxy resin suitable for below ground or damp environments where concrete cannot be dried out.

A two pack gas resistant waterproof coating for waterproofing and protecting concrete structures.

A single pack, penetrating, hydrophobic silane-siloxane treatment for concrete and masonry.

A single pack, solvent based acrylic protective and decorative coating for concrete and masonry at low temperatures.