Full Product Catalogue

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

A two pack, semi gloss polyurethane coating for steel structures subject to weathering or chemical stress. LuL APR No.2940

A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

An anti-corrosive which can be applied directly to mechanically prepared shop primer or suitably prepared bare steel.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A 2K high build epoxy primer containing anticorrosive pigments.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.

A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy sealer coat, pigmented with micaceous iron oxide.

A low VOC, high solids, high build, two component epoxy coating.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

For the treatment of weld seams, lap joints & kerb angles.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

A long lasting solvent based, non chalking swimming pool paint.