£7.75 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
A tough, hard wearing finish coat for application over properly primed surfaces.
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.
Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.
A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.
A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.
A versatile primer for long-term protection of steel in severely corrosive environments.
This product is now discontinued. See Hempel Hempaline Defend 630 as a potential alternative.
For long-term protection of hot pipework, equipment and other hot surfaces.
A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.
Suitable for use as a finishing coat for protection of structural steel.
This product is now discontinued. See PPG Sigmacover 350 as a potential alternative.
A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.
Designed for use within certain International Paints to provide a safe anti slip finish to walkways.
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.
A glass flake vinyl ester acrylic co-polymer that is approved to NORSOK Rev 6 System 7A and 7B.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.
A two component, high build, amine adduct cured, phenolic epoxy holding primer.