PPG Nu-Klad Aqua is a two-component, waterborne epoxy floor coating with a fast return to service for industrial areas with occasional light traffic. Used in the infrastructure sector.
PPG Nu-Klad Aqua is suitable for industrial areas with occasional light traffic and offers a fast return to service and good abrasion resistance. PPG Nu-Klad Aqua can be over coated with a polyurethane topcoat for aesthetic durability and the PPG fine or medium aggregate can be added to the paint to create an anti-slip finish. A thinned version can be used as a primer for application directly on concrete.
Mix thoroughly using a mechanical mixer. Apply using airless spray or brush / roller. Follow data sheets for specification.
- Nu-Klad Aqua a two-component, waterborne epoxy floor coating
- Suitable for industrial areas with occasional light traffic
- Fast return to service
- Good abrasion resistance
- Can be overcoated with a polyurethane topcoat for aesthetic durability
- Suitable for use with anti-skid
- A thinned version can be used as a primer for application directly on concrete
|Stock Colours:||Only tints|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||6.0g per Litre|
|Suitable Substrates:||For floors|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||8.8 m2 per litre at 60 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||60 - 100 microns|
|Pot Life:||3 hours at 20°C|
|Dry to Walk On:||5 hours at 20°C|
|Overcoatable:||Between 5 hours and 21 days at 20°C with itself|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||Base: 12 months, Hardener: 6 months when stored cool and dry|
|Packaging:||Available in 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.