*PPG Sigma AquaCover 22

SKU
id3878
***
This product is now discontinued.
Out of stock
Product Description

This product has now been discontinued. Please contact our technical team for a suitable alternative.

Sigma AquaCover 22 is a fast drying primer which provides an anti-corrosive protective coating to structural, pre-treated and galvanised steel.

Sigma AquaCover 22 is a one component waterborne micaceous iron oxide pigmented primer based on acrylic dispersion. Particularly suitable when solvents are not permitted for health and safety reasons.

Best Uses

Sigma AquaCover 22 is best used to provide adhesion to pre-treated surfaces and can be overcoated with most waterborne acrylics, waterborne epoxy coatings and alkyd paints, as well as certain solvent borne two component products.

Application

Sigma AquaCover 22 can be applied using an airless spray or a long haired brush or roller with rounder edges. Sigma AquaCover 22 has a fast drying time, being touch dry in 15-30 minutes and ready to overcoat in 4 hours. Sigma AquaCover 22 has a theoretical coverage rate of 8m sq. per litre, is available in a selection of shades and is suitable for use on metal.

Surface and Environment

Sigma AquaCover 22 is designed for use in industrial or construction environments, for use on structural, pre-treated and galvanised steel. It provides a protective coating that prevents the corrosion that can weaken the substrate.

Technical Details
  • One component waterborne micaceous iron oxide pigmented primer based on acrylic dispersion
  • Particularly suitable when solvents are not permitted because of health and safety reasons
  • Developed to give excellent adhesion to galvanised steel
  • Theoretical spreading rate 8 m sq/l for 50 microns
  • Can be overcoated with most water borne acrylics, waterborne epoxy coatings and alkyd paints
  • Touch dry after 15 - 30 minutes
  • Minimum overcoating interval 4 hours

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.