PPG SteelGuard FM 549

PPG SteelGuard FM 549

SKU id2260 UN1263 (Class: 3, Pk Grp: II)
This product is now discontinued.

Product Description

Promain In Partnership With Check A Trade

This product has now been discontinued. Please contact our technical team for an alternative.

PPG Steelguard FM 549 is a single component, thin film, solvent borne intumescent coating for the protection of structural steelwork against cellulosic fires for up to 120 minutes.

Best Uses

PPG Steelguard FM 549 provides up to 120 minutes protection from cellulosic fires, for off-site or on-site application. Suitable for C1 and C2 internal environments (ISO 12944); for dry internal (C1) environments no topcoat is required. Tested and assessed to international and national standards such as BS 476-20/21, AS 1530:4 and certified with various national requirements.

Application

Approved primer must be sound, dry and free from any contamination. Substrate temperature during application and curing should be between 5°C and 40°C. View data sheets for full information.

Recommended Products To Use


PPG Thinner 21-06

PPG Thinner 21-06

Suitable for Sigmacover 640/640LT.

From £25.50 (£30.60 Inc VAT)