Full Product Catalogue

Waterproofing product for hydraulic projects such as channels, faces of dams, swimming pools, basins, storage tanks, etc. and balconies and terraces.

A self levelling and smoothing compound for use on domestic and commercial internal flooring.

A hygienic paint for interiors able to counteract the deposit and proliferation of moulds, viruses and bacteria on surfaces, even when frequently wash...

A high grab, ready-to-use, non-slip paste adhesive for ceramic tiles. For use on interior walls. Ideal for tiling on to plaster and plaster board.

A 2 pack epoxy resin based binder, used as a fixing primer or adhesion promoter, or as a binder when mixing resin mortar with consistency similar to a...

Recommended for protecting marble, granite or natural stone facings against graffiti drawn with spray-paint, crayons, markers, etc.

Recommended for all surfaces not previously treated with graffiti-repellent protection against conventional spray-paints.

Acrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.

A solvent-based fixing primer with high penetration properties for porous substrates and curing agent for repair mortars.

An easy to use general purpose bitumen waterproofing emulsion for cold waterproofing masonry and concrete vertical and sloping surfaces.

A single pack, solvent free, moisture curing, rapid drying polyurethane membrane, with low VOC's, for waterproofing cementitious screeds.

Water repellent cementitious skimming mortar with fine, natural finish for concrete and plastic, glass and porcelain coatings.

An easy to apply on suitably prepared masonry substrates general purpose render for internal and external use.

A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.

Formulated for bonding all types of thermal-insulating panels directly on to render, masonry and concrete on walls and ceilings.

A general purpose non-shrink grout.

A single pack product for use on new and old cycle tracks, footpaths and urban features in cement or asphalt.

A 2 part, low yellowing, polyurethane finishing compound formulated to form a transparent, wear-resistant protective finishing coat on Mapei epoxy pro...

An alkali-resistant fibre glass mesh used to reinforce waterproof protection layers, antifracture membranes and cementitious smoothing and levelling l...

An alkali-resistant glass fibre mesh for reinforcing Mapei's fine-graded skimming pastes.

A non-woven polypropylene reinforcement fabric applied in combination with Aquaflex Roof products range.

Designed as a reinforcement mesh for protective reinforcing coats on façades and render with micro-cracks or crazing.

A filling and evening layer for covering small imperfections in cementitious surfaces before applying a finish coat from the Mapei Silancolor range.

A filling and evening layer for covering small imperfections in cementitious surfaces before applying a finish coat from the Mapei Silancolor range.

A filling and evening layer for covering small imperfections in cementitious surfaces before applying a finish coat from the Mapei Silancolor range.

2 component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.

2 component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, rapid drying elastic cementitious mortar for waterproofing terraces and balconies, even at at low temperature.