£9.95 delivery on orders excluding certain products & postcodes *
Suitable for thinning paints and equipment cleaning from International Paints.
Suitable for thinning paints and equipment cleaning from International Paints.
Formulated to protect internal wooden floors and surfaces against scratches, liquids heat and chemicals.
A 2 pack, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.
A versatile primer for long-term protection of steel in severely corrosive environments.
Coarse self adhesive anti slip tape, available in a wide range of sizes and colours.
Extremely useful method of pointing out exits in times of power cuts and fires.
For long-term protection of hot pipework, equipment and other hot surfaces.
A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.
A temporary safety solution for where short term hazards need to be identified, without permanently defacing the area.
Provides Class '0' Spread of Flame for interior wood. Must be applied over Bollom Intulac Ultra Intumescent Base Coat.
A fast drying urethane alkyd based full gloss clear varnish with good resistance properties for yacht wood in either fresh or sea water.
A full matt, water-borne, acrylate-based adhesion primer for wash and wear resistant top coats on internal walls or ceilings.
For washing wooden terrace floors and garden furniture plus pre-treating surfaces.
A water-borne two pack polyurethane clear varnish for overcoating Teknos Aqua 3393.
Suitable for top coating furniture with wooden and primed metal surfaces.
An air drying, water borne topcoat for direct adhesion onto most powder coated surfaces and ABS and polystyrene plastic.
A clear surface coating, in a matt or gloss finish, offering excellent protection against graffiti and poster vandalism.
No Bicycles Stencil for Road Marking. Made from semi-clear robust 350 micron polyester material in 4 sizes.
A water based, CO2 inhibiting, water repellent protective coating for renovation and repair measures on concrete surfaces.
For gutter cleaning within large commercial environments, up to four storeys high.
Formulated for thinning and cleaning up alongside our Centrecoat HB Anti-Corrosive Cladding Paint.
A two part, very low yellowing, low viscous, transparent epoxy resin for mortars, screeds and seal coats.
A single pack phosphoric acid etch solution for the preparation of fresh galvanised surfaces prior to painting.