Full Product Catalogue

A high performance, low VOC, water borne two component epoxy with a high gloss finish for use on structural steel and concrete floors.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

For the treatment of weld seams, lap joints & kerb angles.

For application to steel tank internals.

A two component, high solids low VOC epoxy micaceous iron oxide.

Formulated to protect internal wooden floors and surfaces against scratches, liquids heat and chemicals.

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

A versatile primer for long-term protection of steel in severely corrosive environments.

A universal epoxy and self-primed high performance coating system.

A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.

Suitable for use as a finishing coat for protection of structural steel.

A water-borne two pack polyurethane clear varnish for overcoating Teknos Aqua 3393.

A very fast reacting transparent binder for blind coatings that can full cure down to 0°C.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.

A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.

A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.

A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.

A two pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A light coloured, solvent free, pure epoxy coating for potable water tanks.

A two pack epoxy primer / undercoat / tie coat for internal ship spaces.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.