£9.95 delivery on orders excluding certain products & postcodes *
A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.
Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.
A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.
A two pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.
A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.
A two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.
A solvent based intumescent coating for structural steel exposed to internal environments up to corrosivity category C4 (ISO 12944-2).
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155
A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.
Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be used as part of a high pressur...
A high gloss coach enamel available in historic colours.
A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.
A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.
Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.
Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.