Full Product Catalogue

A general purpose anti-corrosive metal primer, giving a high build matt finish.

A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.

A two pack epoxy primer / undercoat / tie coat for internal ship spaces.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.

A highly cross-linked, two component, high build epoxy phenolic coating.

A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.

A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.

A fairly quick-drying alkyd paint for various substrates in mild to moderately corrosive environments.

A water-borne, acrylic dispersion based paint for interior and exterior moderate to sever corrosive environments.

For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.

A heat resistant aluminium pigmented polysiloxane paint for the protection of hot pipelines up to 600°C.

Designed to withstand heats of up to 425°C in sheltered or interior environments.

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110

For above and below the waterline on GRP fibreglass, wood, steel and ferro cement.

A quick drying, tough, flexible paint designed for use on metal surfaces.

A high build solvent free epoxy offering a smooth tile like finish, excellent protection against solvents and oils.

Single pack metal primers for bare and lightly rusted metals, suitable for all uses up to heavy industrial applications.