£9.95 delivery on orders excluding certain products & postcodes *
A phosphoric acid based mordant solution for treating galvanised steel. Highways Approved No. 155.
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155
For GRP, wood, steel and ferro-concrete hulls in low fouling areas with speeds of up to 8 knots.
A quick drying, low odour, primer/finish coat, with stain blocking, and anti corrosion, which can be tinted to most colours.
An industrial detergent used for degreasing oily or soiled surfaces prior to painting.
Suitable for dry heat 450°C. Designed for use on damaged galvanized surfaces.
Formulated for application to new, bare steel, blasted steel or galvanized steel surfaces to provide a clear finish. Copper, chrome, silver, bronze, n...
A single pack phosphoric acid etch solution for the preparation of fresh galvanised surfaces prior to painting.
A single pack acid etch primer free from zinc chromate that is ideal for use as a pretreatment primer above water.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
A solvent based super adhesion primer for use on PVDF and PDVF2 metal profile cladding.
A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.
A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.
A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
Suitable thinner for use with Selemix Direct Pro 7-159.
A single pack zinc primer for use with Fosroc's Renderoc repair systems.