£9.95 delivery on orders excluding certain products & postcodes *
Heat-resistant, zinc silicate shop primer for corrosion protection up to 800°C.
A light coloured, solvent free, pure epoxy coating for potable water tanks.
A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.
A one pack, alkyd based, high visibility coating for marking on ships. Available in fluorescent orange.
A two pack epoxy primer / undercoat / tie coat for internal ship spaces.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.
A 1 pack, fast drying, high build alkyd shop primer. For mild to moderate corrosive environments.
A highly cross-linked, two component, high build epoxy phenolic coating.
A 1 pack, finish suitable for areas subject to intermediate service temperature that require a coloured finish.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.
A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A modern architectural sol-silicate concrete paint for opaque coatings in intensive black.
A one part low viscosity, reactive impregnation for concrete and cementitious substrates based on concentrated Silane emulsion.
A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.
A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.
A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
A 2 pack, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.
A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate.
A fairly quick-drying alkyd paint for various substrates in mild to moderately corrosive environments.
A 2 pack, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.
A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.
A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.
A two-component, amine adduct cured phenolic epoxy (novolac) tank and pipeline coating.
An oleoresinous general purpose aluminium paint with good heat resistance and good light reflection.