£9.95 delivery on orders excluding certain products & postcodes *
A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.
A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.
A heat resistant aluminium pigmented polysiloxane paint for the protection of hot pipelines up to 600°C.
A 1 pack, high build bituminous product. For use behind linings / cofferdams. Protects enclosed steel. Highways Agency No141.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
An epoxy powder coating particularly suitable for storage tanks for the water industry.
For GRP, wood, steel and ferro-concrete hulls in low fouling areas with speeds of up to 8 knots.
An industrial detergent used for degreasing oily or soiled surfaces prior to painting.
For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.
For above and below the waterline on GRP fibreglass, wood, steel and ferro cement.
Suitable for dry heat 450°C. Designed for use on damaged galvanized surfaces.
Formulated for application to new, bare steel, blasted steel or galvanized steel surfaces to provide a clear finish. Copper, chrome, silver, bronze, n...
A high performance single pack water based rust converter. Suitable for use on structural steel and machinery.
Designed to withstand heats of up to 425°C in sheltered or interior environments.
A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
Suitable thinner for use with Selemix Direct Pro 7-159.
Advanced coating offers quicker drying and reduced risk when curing at sub-zero temperatures.