£7.75 delivery on orders excluding certain products & postcodes *
A water based environmentally friendly clear sealer containing the highest quality polyurethane and acrylic Resins.
A high crack bridging, anti carbonation, water repellent masonry paint for walls and Park Homes.
Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.
A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.
A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.
A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.
A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.
Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.
A 2-part, low odour, low viscosity, multi-purpose epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed.
A durable, low odour, low emission line marking paint with a rapid through cure and return to service.
A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.
A 2 part epoxy primer for use on flooring prior to application of Centrecoat Armourcoat 3-350.
Provides a tough, hard wearing coating for light & medium duty traffic giving high performance at an economical cost.
A 2 pack polyurethane sealer designed to protect concrete surfaces, providing a hygienic and durable floor.
A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.
A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.
Formerly Liquid Plastics Sterimatt 206W. A hygienic waterborne modified acrylic resin surface coating with a matt finish.
A high performance epoxy system for application at temperatures down to 0°C.
Fast Setting for Deep Holes in Concrete and Power Floated Floors and slabs.
A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete.
A colourless, silane and siloxane-based water repellent impregnator in a watery emulsion.
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.
Formulated for short term indentification onto concrete, tarmac, wood, composites, grass etc.
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.
A fast curing two part polyester anchoring adhesive that is solvent and styrene free.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.