£9.95 delivery on orders excluding certain products & postcodes *
A high build 2-pack polyamide cured epoxy zinc phosphate primer finish for use as an internal flow coating for pipelines.
An easy to apply, high filling primer with excellent anti corrosive properties, ideal for protecting ferrous steel from the elements.
A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.
A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....
A clear, water-borne, two pack polyurethane lacquer, resistant to yellowing. Ideal for interior woodwork.
High-performance 2K acrylic polyurethane clearcoats designed to achieve from very high gloss to very matt finish.
A 2K high build epoxy primer containing anticorrosive pigments.
An exterior scrim free intumescent coating for up to 120 minutes fire protection.
A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.
A tough, hard wearing finish coat for application over properly primed surfaces.
A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A very fast reacting transparent binder for blind coatings that can full cure down to 0°C.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.
A two component, solvent free amine cured epoxy coating. Suitable as a tank coating for crude oil and aliphatic petroleum products.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.
A self-priming epoxy with good impact and abrasion resistance. BBA Cert. no. 08/H135-PS1. Highways Approved Item No.123.
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...