Full Product Catalogue

A tough, hard wearing finish coat for application over properly primed surfaces.

A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

For the treatment of weld seams, lap joints & kerb angles.

A very fast reacting transparent binder for blind coatings that can full cure down to 0°C.

A very fast reacting pigmented coating for use as either a base coat or top sealant in Remmers flooring systems.

Provides 60 minutes of cellulosic fire protection for beams, columns, and hollow sections in interiors.

A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.

A cementitious epoxy resin compensated 3-component coating used as bonding primer and reinforcement corrosion protection.

A 2 pack, solvent free amine cured epoxy. A tank coating for crude oil and aliphatic petroleum products.

A multi-functional low temperature curing phenalkylated zinc phosphate coating for the protection of carbon steel.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A solvent based intumescent coating for structural steel exposed to corrosivity category C4 (ISO 12944-2).

A system component of Sika ESD and Electro Static Floor Systems to provide earthing points within the flooring layers.

Provides you with the safest and most effective water based stripping system available on the market today.

A solvent coating which resists alkalis and ageing on mineral substances including concrete and cementitious surfaces.

A one part primer for very dense or porous concrete surfaces and/or difficult application conditions.

Part of the Sika ComfortFloor systems and provides a water based, matt seal coat which is low in odour and UV resistant.

A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.

A one pack acrylic thin film base coating for the protection for internal and semi exposed structural steelwork up to 60mins.

A two component epoxy mastic coating for repair and maintenance.

Suitable for use in a range of markets where durable performance and aesthetics are needed.

A 1 pack, solvent-borne, fast drying intumescent coating for passive fire protection of structural steel.

Fast drying intumescent coating for structural steel.

Part of the Sikagard Anti Graffiti Coating System.