£9.95 delivery on orders excluding certain products & postcodes *
A water based polyurethane coating which can be applied direct to suitably prepared steel.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
A two pack, semi gloss polyurethane coating for steel structures subject to weathering or chemical stress. LuL APR No.2940
A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
An anti-corrosive which can be applied directly to mechanically prepared shop primer or suitably prepared bare steel.
A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
A 2K high build epoxy primer containing anticorrosive pigments.
For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.
A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.
For use on a wide variety of substrates including hand prepared rusty steel.
A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.
A long lasting solvent based, non chalking swimming pool paint.
A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.
A high performance epoxy system for application at temperatures down to 0°C.