Jotun Marine and Coastal

Specially designed as a universal, all round, all year, new building coating where fast dry to handle is required.

Provides corrosion protection for surfaces operating at extreme temperatures down to -196°C and high temperatures up to 250°C on carbon steel.

A 2 pack polyamine cured pure epoxy coating that can be used as primer, mid-coat, finish coat or as single coat system in atmospheric and immersed env...

For exterior and interior marine areas, including outside hulls, superstructures, decks and water ballast tanks as an outfitting primer.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved No.169.

A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.

A 2 pack high build anti-corrosive epoxy mastic for high film thicknesses for smaller maintenance and repair jobs.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

Corrosion protection for surfaces operating at elevated temperatures where long corrosion protection is desired. Suitable for insulated and non insula...

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....

A 2 pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail / Highways No. 185.

Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

A two component epoxy mastic coating for repair and maintenance.

Surface-tolerant epoxy mastic for less severe exposures in tough environments.

A low gloss polyurethane topcoat for atmospheric environments.

A 2 pack surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance.

A 1 part alkyd that is fast drying, high build, zinc phosphate pigmented primer / mid coat for atmospheric environments.

A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating. Blend of fused aluminium oxide.

A 2 pack fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

Fouling coating that ensures an active surface continuously renewed providing a clean hull for the whole season.