NORSOK Approved Paints

A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

For application to steel tank internals.

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

A versatile primer for long-term protection of steel in severely corrosive environments.

This product is now discontinued. See Hempel Hempaline Defend 630 as a potential alternative.

For long-term protection of hot pipework, equipment and other hot surfaces.

A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.

Suitable for use as a finishing coat for protection of structural steel.

This product is now discontinued. See PPG Sigmacover 350 as a potential alternative.

A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.

Designed for use within certain International Paints to provide a safe anti slip finish to walkways.

Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A glass flake vinyl ester acrylic co-polymer that is approved to NORSOK Rev 6 System 7A and 7B.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.

A two component, high build, amine adduct cured, phenolic epoxy holding primer.

Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.

A 2 pack structural steel and piping coating that will continue to cure while immersed.

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.