NORSOK Approved Paints

A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

For application to steel tank internals.

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

A versatile primer for long-term protection of steel in severely corrosive environments.

This product is now discontinued. See Hempel Hempaline Defend 630 as a potential alternative.

For long-term protection of hot pipework, equipment and other hot surfaces.

A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.

Suitable for use as a finishing coat for protection of structural steel.

This product is now discontinued. See PPG Sigmacover 350 as a potential alternative.

A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.

Designed for use within certain International Paints to provide a safe anti slip finish to walkways.

Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A glass flake vinyl ester acrylic co-polymer that is approved to NORSOK Rev 6 System 7A and 7B.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.

A two component, high build, amine adduct cured, phenolic epoxy holding primer.

Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.

A self-priming, two-component, high-build, pure epoxy paint.

A two component, moisture curing, zinc rich silicate coating used as a tank coating to provide excellent solvent and chemical resistance.

A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.