£7.75 delivery on orders excluding certain products & postcodes *
Promain UK Limited offer a vast range of metal primers suitable for application to all types of metal surfaces.These metal primers will help prepare the material before painting as well as ensuring that there will be a better adhesion for the paint when applied to the surface. Primers also increase the durability of the paint as well providing the metal with an extra layer of protection. The range of metal primers that we have at Promain are available so that we can be sure that you are getting the very best primer depending on the surface that you are painting. Promain supply metal primers that come in a range of application methods, whether this is applied with a brush, roller, airless spray or an aerosol paint we have the perfect application method for you depending on your requirements.
A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.
A 2 part, moisture curing, waterborne, low zinc silicate, prefabrication primer suitable for immediate application on shot blasted steel plates.
A two pack blast primer for Sherwin Williams Firetex intumescent coatings.
A two component polyamide cured waterborne epoxy primer which is particularly suitable when solvents are not permitted, for health and safety reasons....
A two component moisture curing, low zinc, silicate prefabrication primer, suitable for application on shot blasted steel plates.
A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.
A two component, quick drying, anti-corrosive zinc epoxy primer for use onto suitably prepared steel.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
Cold Galvanising zinc paint for cathodic anti corrosion metal protection and rust resistance.
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.
A two component, metallic zinc primer for steel in aggressive environments.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A multi-functional low temperature curing phenalkylated zinc phosphate coating for the protection of carbon steel.
A 2 pack primer offering excellent adhesion and protection properties for steel in the harshest of environments up to C5M-low.