£7.75 delivery on orders excluding certain products & postcodes *
Promain have a wide range of certified coatings for both internal tank linings and external works. Whether you are looking for coatings for the internals of grain and dry foodstuff silos or for storage of chemicals we have a range of approved products. Promain are proud to supply coatings suitable for use in the petrochemical industry for the transportation and storage of petrol, diesel, jet fuel, gasoline, crude oil and more. We also supply coatings for the inside of ballast tanks.
View our extensive selection of tank linings below from manufacturers including Sika, Sherwin Williams, PPG, International, Jotun and Hempel.
A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.
A two part, epoxy wall coating suitable for use alongside resin flooring to provide a continuous seamless finish.
An epoxy novolac coating designed to provide protection to concrete and steel structures in aggressive chemical conditions.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...
A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.
A one pack, PU MIO sealer suitable for use over Zinga and Aquazinga, providing a protective seal against salt and chemical exposure.
A one pack moisture curing, polyurethane, MIO paint designed to replace normal cold tar products.
A two component, solvent free, amine cured epoxy coating for use as a chemical resistant, surface tolerant tank lining.
A flake filled MIO amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures.
A two component, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.
A two-component, solvent-free, amine-cured modified phenolic epoxy tank coating suitable for aviation fuel.
A light reflective single pack oleoresinous aluminium coating that is ideal for pipework, cargo holds, etc.
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
A patented technology, high performance, low VOC single pack acrylic polysiloxane finish coat containing no free isocyanates.
A two-component, amine adduct cured phenolic epoxy (novolac) tank and pipeline coating.
An oleoresinous general purpose aluminium paint with good heat resistance and good light reflection.
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.
An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.
A high solids epoxy tank lining with exceptional chemical resistance. Formulated primarily as a tank lining.
A two pack topcoat especially for objects exposed to heavy abrasion and chemical attack.
A solvent free coating designed for installation onto steel or concrete surfaces.