Full Product Catalogue

A sulphate resistant, fibre reinforced shrinkage compensated thixotropic mortar for the repair of concrete – class R4.

One component corrosion-inhibiting cement for the protection of reinforcing rods.

A two-component multi-purpose neutral-coloured epoxy formulate in water dispersion to create vapour-permeable coatings on industrial floors.

A filling and evening layer for covering small imperfections in cementitious surfaces before applying a finish coat from the Mapei Silancolor range.

Recommended for protecting marble, granite or natural stone facings against graffiti drawn with spray-paint, crayons, markers, etc.

Recommended for all surfaces not previously treated with graffiti-repellent protection against conventional spray-paints.

Acrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.

A solvent-based fixing primer with high penetration properties for porous substrates and curing agent for repair mortars.

An easy to use general purpose bitumen waterproofing emulsion for cold waterproofing masonry and concrete vertical and sloping surfaces.

Self-levelling industrial floor screed based on special hydraulic binders for abrasion-resistant flooring, thickness from 5 to 40mm.

A single pack, solvent free, moisture curing, rapid drying polyurethane membrane, with low VOC's, for waterproofing cementitious screeds.

A two-component epoxy coating suitable for self-levelling and or multi-layer resin flooring with or without a non-slip finish.

Water repellent cementitious skimming mortar with fine, natural finish for concrete and plastic, glass and porcelain coatings.

2 component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, rapid drying elastic cementitious mortar for waterproofing terraces and balconies, even at at low temperature.

Two-component solvent free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.

An easy to apply on suitably prepared masonry substrates general purpose render for internal and external use.

A solvent free bitumen primer for evening out and improving bonding to substrates before applying a waterproofing product from the Mapei Plastimul ran...

A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.

Formulated for bonding all types of thermal-insulating panels directly on to render, masonry and concrete on walls and ceilings.

A general purpose non-shrink grout.