£7.75 delivery on orders excluding certain products & postcodes *
R2-class, rapid-setting shrinkage compensated thixotropic, fibre-reinforced, cementitious mortar applied in a single layer from 3 to 40mm thick, for r...
A rapid-setting fibre-reinforced structural cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete...
Two- component fillerized epoxy primer used before applying a range of single or two pack floor paints or epoxy and polyurethane resin systems.
A silicone resin based, breathable paint that has the advantages of traditional mineral based paints as well as synthetic paints.
A filling and evening layer for covering small imperfections in cementitious surfaces before applying a finish coat from the Mapei Silancolor range.
Recommended for protecting marble, granite or natural stone facings against graffiti drawn with spray-paint, crayons, markers, etc.
Acrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.
An easy to use general purpose bitumen waterproofing emulsion for cold waterproofing masonry and concrete vertical and sloping surfaces.
Self-levelling industrial floor screed based on special hydraulic binders for abrasion-resistant flooring, thickness from 5 to 40mm.
Water repellent cementitious skimming mortar with fine, natural finish for concrete and plastic, glass and porcelain coatings.
2 component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.
Two-component solvent free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.
An easy to apply on suitably prepared masonry substrates general purpose render for internal and external use.
A solvent free bitumen primer for evening out and improving bonding to substrates before applying a waterproofing product from the Mapei Plastimul ran...
A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.
Formulated for bonding all types of thermal-insulating panels directly on to render, masonry and concrete on walls and ceilings.
A kiln dried quartz sand for use with Mapei epoxy and polyurethane resins. Available in 0.25, 0.5, 0.9, 1.2 and 1.9mm particle sizes.
A solvent free, low odour acrylic primer for interior use to aid adhesion on all absorbent and non absorbent surfaces.
A polymer modified cement based textured render finish supplied in powder form to be mixed with water. Suitable for winter use.
Fast setting light – coloured fine mortar for repairs and finishing of concrete and renders.
Quick-setting, fibre-reinforced cementitious mortar for internal and external floors and walls, applied at a thickness from 3 to 30mm to smooth out ir...
A medium strength (40 MPa), shrinkage-compensated, fibre reinforced, thixotropic mortar for concrete – class R3.
A sulphate resistant, fibre reinforced shrinkage compensated thixotropic mortar for the repair of concrete – class R4.
A macro-porous, salt-resistant dehumidifying breathable render. Based on lime and eco-Pozzolan. Ideal for restoring old masonry, including buildings o...
A salt-resistant, transpirant breathable scratch coat traditional mortar, based on lime and Eco-Pozzolan.
A transpirant breathable render for use on heritage, listed or older properties of historical interest.