£7.75 delivery on orders excluding certain products & postcodes *
A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete.
A single component, cold-applied, moisture-triggered polyurethane membrane. It cures to form a seamless, durable and weather- resistant waterproofing ...
A polyester fleece used as reinforcement with Sikalastic Liquid Applied Membrane systems.
Formerly Sikafloor 326. A two part solvent free, coloured self-smoothing PUR floor resin, with tough-elastic properties.
A 2-pack acrylic polyurethane ideally suited to all environments where both protective and decorative considerations are present.
A two part, very low yellowing, low viscous, transparent epoxy resin for mortars, screeds and seal coats.
A three part, epoxy modified cementitious, fine textured mortar for self smoothing floor screeds in thin layers of 1.5 to 3mm.
A one part low viscosity, reactive impregnation for concrete and cementitious substrates based on concentrated Silane emulsion.
Polymer Modified Bentonite Waterproofing System. Self healing membrane for basement and below ground structures.
A single component mastic consisting of polymer modified natural sodium bentonite and further polymer additives.
A solvent based, clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete.
A multi-component, water based coloured polyurethane hybrid flooring screed.
A two part, solvent free, very low VOC emission, tough-elastic, coloured, self-smoothing PUR resin.
A thixotropic, 2-component repair mortar, based on a combination of epoxy resins with refined quartz fillers.
A cementitious epoxy resin compensated 3-component coating used as bonding primer and reinforcement corrosion protection.
A moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar.
A cement based, fast setting, polymer modified one component repair mortar meeting the requirements of Class R4 of BS EN 1504-3.
A three part epoxy mortar, consisting of an epoxy binder and quartz sand with a maximum grain size of 1.2 mm.
A one component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3.
A one component modified SBR polymer, blended with plasticisers and selected fillers.
A three part, epoxy modified cementitious, thixotropic, fine textured mortar for levelling and finishing of concrete, mortar or stone surfaces.
A two part adhesion promoting primer based on polyurethane resin for several Sikalastic systems.
A multi-component, water based coloured polyurethane hybrid flooring screed with self-smoothing properties.