£9.95 delivery on orders excluding certain products & postcodes *
A primer for use prior to application of the Centrecoat MMA FG range of products in cold environments such as freezers down to -25°C.
A 2 pack, fast curing, clear sealer for use as the finish coat for MMA flooring products in the Centrecoat MMA FG Freezer Grade range.
Developed as a substrate specific primer for tarmac and asphalt, being used prior to any suitable Centrecoat MMA product.
A 2 pack, fast curing, clear sealer used as the finish coat for flooring products from our MMA range.
A 3 pack methacrylate resin system. Imparts toughness, resilience and waterproofing properties to the cured membrane.
A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.
A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.
A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.
A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.
A three pack methacrylate resin coating suitable for use in freezer grade environments down to -40°C.
A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.
A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.
An equipment cleaner suitable for the removal of uncured methyl methacrylate resins.
A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.
A two pack, fast curing flexible coating for tarmac or asphalt surfaces such as balconies.
A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.
Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.
A 2 pack, fast curing, clear sealer used as the finish coat for other flooring products in the MMA Fire Rated range.
A very fast curing fire resistant and slip resistant coating offering a full return to service after just 2 hours.
Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.
Propane gas torches for use with thermoplastic line marking and thermoplastic signs.
A hard, angular aggregate mineral for use in Centrecoat slip resistant flooring and decking systems.
A two pack primer formulated to prepare oil contaminated floors prior to application of subsequent Centrecoat floor coatings.
Formulated for rapid and permanent repairs to concrete and masonry surfaces.
Electric Car Charging Point Stencil. Made from semi-clear robust 350 micron polyester material in 4 sizes.
A two pack, fast curing flexible coating for line marking paint for concrete surfaces.
A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.
A two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance.