Full Product Catalogue

A two-component, solvent-free, amine-cured modified phenolic epoxy tank coating suitable for aviation fuel.

A two component, high build, amine adduct-cured novolac phenolic epoxy coating for offshore, marine and chemical / petrochemical sectors.

A two component, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.

A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.

An anti fouling release finish coat based on 100% pure silicone binder technology.

A two component, high build polyamide cured epoxy primer coating for application down to -5°C.

A two component, solvent free amine cured epoxy coating. Suitable as a tank coating for crude oil and aliphatic petroleum products.

Produced in 0.2 - 0.4mm grade to offer non-slip properties to many floor paints.

A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.

A two component solvent free amine cured phenolic epoxy coating for pipe externals.

A 2 part, moisture curing, waterborne, low zinc silicate, prefabrication primer suitable for immediate application on shot blasted steel plates.

A two-component, tough and abrasion resistant aliphatic clear acrylic polyurethane gloss finish.

A two component, high build, amine adduct cured, phenolic epoxy holding primer.

Formerly Amercoat 160 HF. A one component zinc rich epoxy primer.

Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

A two component polyamide cured waterborne epoxy primer which is particularly suitable when solvents are not permitted, for health and safety reasons....

A heat resistant modified alkyd product that produces an aluminium finish, ideal for use on a variety of metal substrates exposed to a high level of h...

Formally Amercoat 891. Heat resistant silicone/acrylic finish - heat resistant up to 350°C.

A two component moisture curing, low zinc, silicate prefabrication primer, suitable for application on shot blasted steel plates.

Formerly Amercoat 15.

Suitable for Sigmacover 640/640LT.

A thinning substance specially manufactured for use with various different paints, available from Promain UK Ltd.

A thinning substance specially formulated for use with various different PPG paints and coatings.

A clear, high performance, thinning liquid, specially made for use with various different PPG paints, available from Promain UK Ltd.

A clear, thinning product specially designed for use with various different PPG paints.

Thinner 91-92 is a clear, thinning product specially designed for use with various different PPG Sigma paints.

Thinner 21-25 (Amercoat 101) is for use with PPG Hi-Temp 1027.

Formerly Sigmarite 88. Water based cleaner or removing dirt, oil, etc. from floors, metal, cladding etc.