£9.95 delivery on orders excluding certain products & postcodes *
A two component flint reinforced solvent free polyamine cured, epoxy compound suitable for the protection of steel and concrete.
A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.
A 3 component, solvent free, self leveling epoxy floor coating suitable for industrial areas with heavy traffic on to concrete.
A two component, solvent free, amine cured epoxy coating for use as a chemical resistant, surface tolerant tank lining.
A 2 part surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintenance.
A single pack thin film solvent borne intumescent coating for 120 minutes of cellulosic fire protection of structural steelwork.
A single component thin film solvent borne intumescent coating for 90 minutes of protection of structural steelwork against cellulosic fires.
A single component thin film solvent borne intumescent coating for the cellulosic fire protection up to 120 minutes on structural steelwork.
A fast curing, two component, high solids, high build zinc phosphate polyurethane primer / finish for in shop application to steel.
A two component, quick drying, anti-corrosive zinc epoxy primer for use onto suitably prepared steel.
A two pack corrosion resistant metal primer formulated as a weldable pre-construction primer or field or shop applied primer.
A tank lining designed to amplify cargo opportunities and reduce installation costs.
A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.
A single pack, waterborne acrylic dispersion finish for interior accommodations, machinery spaces and engine rooms.
A one component, waterborne acrylic zinc phosphate primer for use within a PPG system.
A single component, solvent based thin film intumescent coating for fire protection of structural steelwork for up to 120 minutes.
A two component, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.
A two-component, solvent-free, amine-cured modified phenolic epoxy tank coating suitable for aviation fuel.
A two component, high build, amine adduct-cured novolac phenolic epoxy coating for offshore, marine and chemical / petrochemical sectors.
A two component, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.
An anti fouling release finish coat based on 100% pure silicone binder technology.
A two component, high build polyamide cured epoxy primer coating for application down to -5°C.
A two component, solvent free amine cured epoxy coating. Suitable as a tank coating for crude oil and aliphatic petroleum products.
Produced in 0.2 - 0.4mm grade to offer non-slip properties to many floor paints.
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.
A two component solvent free amine cured phenolic epoxy coating for pipe externals.