£9.95 delivery on orders excluding certain products & postcodes *
Selemix Thinner 1-420 for use with Selemix Topcoats 1.775.1000, 7-510, 1.775.1100, 7-511, 1.775.1200, 7-512.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
An easy to apply, high gloss topcoat. For the protection of ferrous steel such as plant / agricultural equipment.
Excellent adhesion and a high gloss finish ideal for protecting ferrous steel such as agricultural and plant equipment.
Excellent adhesion and a matt finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.
Selemix Direct Hardener 9-060 for use with Selemix range of 2 pack paints.
Selemix Direct Hardener 9-080 for use with Selemix range of 2 pack paints.
An easy to apply, high filling primer with excellent anti corrosive properties, ideal for protecting ferrous steel from the elements.
For use with Selemix Aqua range of 2 pack paints when painting large areas.
A compatible thinner for Selemix Direct, Selemix 7-510, Selemix 2.705.0502, Selemix 7-512 and Selemix 7-550.
Provides a short flash-off between coats and prior baking in a short time for Selemix 8-110 Gloss and 8-111 Matt.
A 1 pack primer that provides excellent protection on bare steel, black steel, light industrial equipment.
A 2 pack polyurethane topcoat offering good resistance to harsh atmospheric conditions and chemical attack.
A 2 pack polyurethane topcoat is formulated with enamel and will provide a high opacity, high gloss finish.
Provides high gloss with high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.
For addition to Selemix range of 1 pack synthetic primers and topcoats to make them For brush or roller application.
For hammer effect finish via additive. Ideal for application on to light industrial equipment.
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
Additive can be added to compatible Selemix paints to allow application via Electrostatic spray equipment.
A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.
A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
Combine to any compatible Selemix topcoat to improve water repellence, dirt pick up and graffiti resistance.
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
Selemix Aqua Direct Hardener 9-450 for use with Selemix range of 2 pack water based paints.