Full Product Catalogue

A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A two component, high solids low VOC epoxy micaceous iron oxide.

Suitable for use as a finishing coat for protection of structural steel.

2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.

A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A 2 pack semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

2 pack high solids, high build, polyamide cured epoxy for general purpose protection to steel and concrete structures.

A high build polyamide cured recoatable epoxy coating.