£7.75 delivery on orders excluding certain products & postcodes *
An industrial detergent used for degreasing oily or soiled surfaces prior to painting.
A phosphoric acid based mordant solution for treating galvanised steel. Highways Approved No. 155.
A full matt water-borne acrylate dispersion primer for walls and ceilings indoors.
A single pack phosphoric acid etch solution for the preparation of fresh galvanised surfaces prior to painting.
A single pack, single coat, metal and Plastisol cladding paint.
A water-borne urethane alkyd based top coat for window frames, doors, garden furniture indoors and outdoors.
A single pack acid etch primer free from zinc chromate that is ideal for use as a pretreatment primer above water.
A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.
A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.
A two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.
A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.
A water-borne, acrylic dispersion paint with good anti-corrosive properties.
A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155
Single pack, cold galvanizing, zinc rich sacrificial primer for steel.
A 2K high build epoxy primer containing anticorrosive pigments.
Provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.
A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.
Solvent based primer and topcoat for ultimate corrosion protection in low temperatures.
Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
Suitable thinner for use with Selemix Direct Pro 7-159.