£7.75 delivery on orders excluding certain products & postcodes *
A biological stain remover for cleaning concrete driveways, block paving and other surfaces.
For internal or external renovation of concrete floors, holes, cracks and damages.
For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.
Fast repair mortar for repairs in façade areas that are not statically or dynamically stressed.
Kit consists of a two part epoxy coating, a cleaning solution, decoration chips, paint paddle and an instruction DVD.
EpoxyShield Clear Sealer Primer and floor sealer 5220, a water based clear and non yellowing coating.
A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.
A high crack bridging, anti carbonation, water repellent masonry paint for walls and Park Homes.
Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.
A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.
A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.
A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.
A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.
A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.
A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.
A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.
Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.
A 2-part, low odour, low viscosity, multi-purpose epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed.
A Pliolite Exterior Masonry Paint. Use at low temperatures, -5°C. Showerproof in as little as 20 minutes
Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.
A high opacity flat black acrylic coating for metal, wood, cement and masonry.
A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.
Propane gas torches for use with thermoplastic line marking and thermoplastic signs.
An oil / water resistant, flexible and UV resistant finish to concrete floors and block paving driveways.
Formulated for rapid and permanent repairs to concrete and masonry surfaces.
A two pack, fast curing flexible coating for line marking paint for concrete surfaces.
A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.