£9.95 delivery on orders excluding certain products & postcodes *
A very fast reacting transparent binder for blind coatings that can full cure down to 0°C.
A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.
A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.
A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.
A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.
A light coloured, solvent free, pure epoxy coating for potable water tanks.
A two pack epoxy primer / undercoat / tie coat for internal ship spaces.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.
A highly cross-linked, two component, high build epoxy phenolic coating.
A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.
A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.
A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.
A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.
A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.
A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.
A two part adhesion promoting primer based on polyurethane resin for several Sikalastic systems.
A transparent priming and mortar resin floor primer for use within the Remmers OS 8 System.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.