Full Product Catalogue

Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be used as part of a high pressur...

A one part clear siloxane water repellent for walls and absorbent cementitious substrates.

A very durable, solvent-based, spray applied textured coating with crushed marble aggregates and special preservative agents for algae and fungal film...

A quick drying and versatile, non-yellowing water based paint, available in a wide range of colours and a choice of finishes.

Two-component water-based epoxy coating with a shiny finish, for concrete floors and cementitious substrates, to provide an anti-dust, oil resistant f...

Highly concentrated solution for roofs, guttering and driveways which destroys moss, mould and fungi on patios drives etc.

Patio Decking Hard Surface Restorer for walls, floors, paths, roofs, decking, paving, boats and monuments.

Recommended for protecting marble, granite or natural stone facings against graffiti drawn with spray-paint, crayons, markers, etc.

A solvent coating which resists alkalis and ageing on mineral substances including concrete and cementitious surfaces.

Removes salts and deposits from concrete and mortar or smooth surfaces such as power floated floors prior to painting.

For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.

Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.

A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.

An emission free cleaning solution for mineral substrates such as limestone.

An economical dust proofer for non-trafficked cementitious surfaces. Formulated for use as a primer under Fosroc Renderoc repair systems.

A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.

A 2 pack water based epoxy floor paint for concrete and polymer modified cementitious screeds. Category FeRFA Type 1 & 2.

A 2 part epoxy primer for use on flooring prior to application of Centrecoat Armourcoat 3-350.

Provides a tough, hard wearing coating for medium duty traffic giving high film build and wear resistance.

Provides a tough, hard wearing coating for light & medium duty traffic giving high performance at an economical cost.

A weather resistant, clear, water based impregnation and glaze for concrete.

A single pack, penetrating, hydrophobic silane-siloxane treatment for concrete and masonry.

A heavy duty, trowel applied polyurethane floor screed for use on concrete and polymer modified cementitious screeds.

A single pack, solvent free strengthening concentrate for priming & horizontal waterproofing.

A 2 pack polyurethane sealer designed to protect concrete surfaces, providing a hygienic and durable floor.

Primer for sanding, mineral substrates such as P II and P III.

Perfect for use in basements and interior walls suffering from damp.

The recommended primer for Renderoc cementitious repair systems.