Full Product Catalogue

A two pack epoxy resin oil tolerant primer.

A very durable, solvent-based, spray applied textured coating with crushed marble aggregates and special preservative agents for algae and fungal film...

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

A high build solvent free epoxy offering a smooth tile like finish, excellent protection against solvents and oils.

A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

Formerly Liquid Plastics Sterimatt 206W. A hygienic waterborne modified acrylic resin surface coating with a matt finish.

A high performance epoxy system for application at temperatures down to 0°C.

Fast Setting for Deep Holes in Concrete and Power Floated Floors and slabs.

Formulated for short term indentification onto concrete, tarmac, wood, composites, grass etc.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A fast curing two part polyester anchoring adhesive that is solvent and styrene free.

A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete.

A colourless, silane and siloxane-based water repellent impregnator in a watery emulsion.

A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

An elastic joint filler based on water dispersed high polymers.

A Rapid Setting Pourable Grade repair for concrete floors, used inside or outside, applied at thickness's from feather edge to 100mm.

A water based environmentally friendly clear sealer containing the highest quality polyurethane and acrylic Resins.

A high crack bridging, anti carbonation, water repellent masonry paint for walls and Park Homes.

Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.

A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.

A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.

A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.

A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.

Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.

A 2-part, low odour, low viscosity, multi-purpose epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed.

A durable, low odour, low emission line marking paint with a rapid through cure and return to service.