£7.75 delivery on orders excluding certain products & postcodes *
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.
A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.
A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.
Formerly Liquid Plastics Sterimatt 206W. A hygienic waterborne modified acrylic resin surface coating with a matt finish.
A high performance epoxy system for application at temperatures down to 0°C.
Fast Setting for Deep Holes in Concrete and Power Floated Floors and slabs.
A slip resistant, long lasting paint for use on macadam and concrete tennis courts.
A solvent based high performance sealer which is suitable for heavily trafficked areas.
A water based cure and seal for improving the abrasion resistance of all forms of freshly laid or existing concrete.
A highly durable, low-odour coating, for areas that are subject to graffiti.
An exceptionally hard wearing, pre-aggregated, water-based anti-slip floor coating.
A Rapid Setting Pourable Grade repair for concrete floors, used inside or outside, applied at thickness's from feather edge to 100mm.
A water based environmentally friendly clear sealer containing the highest quality polyurethane and acrylic Resins.
A high crack bridging, anti carbonation, water repellent masonry paint for walls and Park Homes.
Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.
A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.
A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.
A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.
A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.
Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.
A 2-part, low odour, low viscosity, multi-purpose epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed.
A durable, low odour, low emission line marking paint with a rapid through cure and return to service.
A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.