Full Product Catalogue

A two pack epoxy resin oil tolerant primer.

A very durable, solvent-based, spray applied textured coating with crushed marble aggregates and special preservative agents for algae and fungal film...

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

A high build solvent free epoxy offering a smooth tile like finish, excellent protection against solvents and oils.

A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

Formerly Liquid Plastics Sterimatt 206W. A hygienic waterborne modified acrylic resin surface coating with a matt finish.

A high performance epoxy system for application at temperatures down to 0°C.

Fast Setting for Deep Holes in Concrete and Power Floated Floors and slabs.

An elastic joint filler based on water dispersed high polymers.

A Rapid Setting Pourable Grade repair for concrete floors, used inside or outside, applied at thickness's from feather edge to 100mm.

A water based environmentally friendly clear sealer containing the highest quality polyurethane and acrylic Resins.

A high crack bridging, anti carbonation, water repellent masonry paint for walls and Park Homes.

Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.

A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.

A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.

A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.

A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.

Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.

A 2-part, low odour, low viscosity, multi-purpose epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed.

A durable, low odour, low emission line marking paint with a rapid through cure and return to service.

A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.

A 2 part epoxy primer for use on flooring prior to application of Centrecoat Armourcoat 3-350.

Provides a tough, hard wearing coating for light & medium duty traffic giving high performance at an economical cost.

A highly elastic primer with good filling properties. Part of the Remmers Colorflex Render System for Park Homes.

A 2 pack polyurethane sealer designed to protect concrete surfaces, providing a hygienic and durable floor.

A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.