£9.95 delivery on orders excluding certain products & postcodes *
A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.
A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.
A quick drying, gloss, brush applied container and skip metal paint.
A one component, solvent-borne, fast drying intumescent coating for passive fire protection of structural steel.
A single pack solvent-based thin film intumescent coating for up to 60 minutes on structural steel.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A high gloss coach enamel available in historic colours.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.
Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.
A high build quick air-drying oxide primer for use on ferrous metals.
A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A 2 pack amine cured epoxy coating for new construction where short dry to handle and over coating times are required.
A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A solvent based intumescent coating for structural steel exposed to corrosivity category C4 (ISO 12944-2).
2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.
For use on a wide variety of substrates including hand prepared rusty steel.
A white spirit based, single pack quick drying primer for the protection of metal against corrosion.
Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).
A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.