£9.95 delivery on orders excluding certain products & postcodes *
A white spirit based, single pack quick drying primer for the protection of metal against corrosion.
A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.
A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.
A quick drying, gloss, brush applied container and skip metal paint.
A one component, solvent-borne, fast drying intumescent coating for passive fire protection of structural steel.
A single pack solvent-based thin film intumescent coating for up to 60 minutes on structural steel.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A high gloss coach enamel available in historic colours.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.
Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).
A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.
Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.
A high build quick air-drying oxide primer for use on ferrous metals.
A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A 2 pack amine cured epoxy coating for new construction where short dry to handle and over coating times are required.
A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A solvent based intumescent coating for structural steel exposed to corrosivity category C4 (ISO 12944-2).
2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.
For use on a wide variety of substrates including hand prepared rusty steel.