Full Product Catalogue

Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.

A one component solvent based acrylic thin film intumescent coating.

A high build quick air-drying oxide primer for use on ferrous metals.

A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).

A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.

A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

A white spirit based, single pack quick drying primer for the protection of metal against corrosion.

A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.

A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.

A solvent based intumescent coating for structural steel exposed to internal environments up to corrosivity category C4 (ISO 12944-2).

A high gloss coach enamel available in historic colours.

A quick drying, gloss, brush applied container and skip metal paint.

Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

A single pack solvent-based thin film intumescent coating for up to 60 minutes on structural steel.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A one component, solvent-borne, fast drying intumescent coating for passive fire protection of structural steel.