£7.75 delivery on orders excluding certain products & postcodes *
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.
A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...
A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
A self-priming coating for steel and concrete. Formerly PPG SigmaCover 640 / Amerlock 400C.
A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.
Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.
Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.
Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.
Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.
A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....
A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....
For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.
Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.
A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.