Search results for: 'jotun thinner'

For use with Jotamastic, Penguard, Jotacote Universal and Barrier range of paints.

A solvent based thinner for acrylic and chlorinated rubber paints and anti-fouling compositions.

A solvent for the following Jotun paints Hardtop AS, Hardtop XP, Hardtop Flexi Hardtop HB Hardtop XA.

A general purpose thinner designed to improve the flow of Jotun Tankguard paints.

A general purpose thinner for most conventional Jotun alkyd or oil based paints.

A paint thinner designed to improve the flow of Jotun paints inorganic zinc ethyl silicates being applied at high temperatures.

Designed to improve the flow and solvent evaporation of Jotun polysiloxanes and cross linked acrylics.

A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....

A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

This product is now discontinued. See Jotun Hardtop XP as a potential alternative.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two pack acrylic isocyanate free topcoat with good gloss retention. Highways Approved Item No.168.

A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.

An easy to use one component alkyd primer featuring good adhesion properties and surface tolerance.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.

A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.

A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...