NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

PPG SigmaZinc 68 GP
A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.

From £267.84 £223.20
PPG SigmaCover 522
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.

From £333.41 £277.84
PPG SigmaDur 550 H
Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.

From £69.60 £58.00
PPG SigmaDur 550
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).

From £80.16 £66.80
*PPG SigmaCover 240 Formerly Amercoat 240
This product is now discontinued. See Hempel Hempadur 15570 as a potential alternative.

In stock
PPG SigmaCover 410 MIO
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

From £324.00 £270.00
PPG SigmaDur 520
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.

From £91.20 £76.00
PPG PSX 700 Engineered Siloxane
For steel from PPG Sigma, Ameron. Highways Approved Item No.185.

From £373.15 £310.96
PPG SigmaGuard CSF 585
WRAS Approved for drinking water. A two component solvent free amine cured epoxy coating.

From £126.72 £105.60
PPG Phenguard Subsea 780 - Formerly SigmaLine 780
A two component amine adduct cured phenolic epoxy finish designed to provide a finish coat as part of a coating system used for the protection of subs...

From £201.89 £168.24
PPG SigmaShield 1200 Formerly Amercoat 340
Formerly Amercoat 340. A two component, abrasion resistant, solvent free, amine cured, phenolic epoxy coating.

From £733.82 £611.52
PPG SigmaTherm 230 Phenolic Epoxy
A two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°...

From £499.87 £416.56
PPG SigmaFast 278
A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...

From £73.06 £60.88
PPG NovaGuard 840
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.

From £494.50 £412.08
PPG SigmaPrime 200
A two component multipurpose polyamide anti-corrosive epoxy paint system from PPG.

From £270.48 £225.40
PPG SigmaPrime 700
A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.

From £320.64 £267.20
PPG NovaGuard 4801
A two component, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.

From £1,098.50 £915.42
PPG Phenguard Subsea 610
A two component, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.

From £120.53 £100.44
PPG SigmaShield 880
A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.

From £75.83 £63.19
PPG SigmaShield 1090
A two component flint reinforced solvent free polyamine cured, epoxy compound suitable for the protection of steel and concrete.

From £387.80 £323.17
PPG SigmaShield 880 GF - Formerly Amerlock 880GF
A 2 part surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintenance.

From £424.12 £353.43
PPG NovaGuard 260 Formerly SigmaGuard 260
A two component, high build, amine adduct cured, phenolic epoxy holding primer.

From £266.02 £221.68
PPG Dimetcote 9 Formerly SigmaZinc 9
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

From £380.76 £317.30
PPG SigmaGuard 750
A two component, moisture curing, zinc rich silicate coating used as a tank coating to provide excellent solvent and chemical resistance.

From £572.48 £477.07
PPG SigmaTherm 540 Moisture Cure Silicone
Formally Amercoat 878 a one component heat resistant moisture curing silicone aluminium.

From £152.88 £127.40

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)